AFP Modules
The Prodel AFP module family is an offline asynchronous pallet transfer system. The pallet sizes available for this system are 20x25cm, 25x28cm or 30x40cm (8"x10", 10"x11" or 12"x 16" approximately). There are several different modules to choose from for either manual or automated operations. These modules, once placed on a support structure, compose the assembly line. Manual stations are available with a number of ergonomic options such as articulating platforms, foot rests, adjustable center tables plus much more. Automatic module integration can vary from simple components such as pneumatics for pick and place or pressing operations to a sophisticated SCARA, Six Axis, or Cartesian robot as shown in the picture below.
AFP System Catalogue - 690k

An AFP assembly line. One standard module, the TurboCell, is composed of a 3A Automatic module integrated with two Cartesian Robots.

System Requirements

  • 480V - 3Ø electrical power
  • 120V - 1Ø electrical power
  • Minimum of 70 PSI dry air
 AFP Assembly Line

System Features
  • Offline assembly is ideal for pairing stations to operate in parallel, especially for bottleneck operations.
  • Repairs may be done in a module without shutting down the entire assembly line.
  • Up to seven (7) tons of pressing capable on the pallet at a station.
  • 20x25cm pallets can handle a twelve (12) pound payload.
  • 25x28cm pallets can handle a sixteen (16) pound payload.
  • 30x40cm pallets can handle a twenty (20) pound payload.
  • Clean room compatible with class 100 Federal Standard 209 Class D limits or ISO 5.
  • Electrostatic dissipate features for assembly of delicate electronics.